English Chinese (Simplified) Japanese German French Italian Spanish Korean

580 Alnico Extra

This is a programmed Guided Ordering Channel where options and choices are presented to you according to the 'bridge saddle spread' that you indicate below and the 'type of cover' you indicate on the SPECIFY Tab. Get those right and you can't go wrong. However we check all orders and we will check with you if we spot a mistake.

Please type complete and accurate the model ID specified by manufacturer. No Serial numbers please. Examples: 1998 American Standard / 2011 Strat Deluxe / Les Paul copy / etc.

 NOTE: Scroll down to see more option.

Saddle Spread (Very Important):

It is very important you indicate the correct bridge because the website will allocate the pole spread for this pickup according to the bridge saddle spread you click. This will assure satisfactory alignment of the poles and strings, resulting in good string loudness balance.

Strat VINTAGE 6 point

Most other bridge

 NOTE: Scroll down to see more option.

Right Handed

0.00 USD

Left Handed

0.00 USD

 NOTE: Scroll down to see more option.

Type of Cover:

HEADS UP: To make sure this pickup will fit your guitar, click this and scroll to Section 3 (Installing in solid body)

Soapbar

Dog-Ear

Modern soapbar Gibson's have a magnetic mounting plate on the floor of the pickup cavities. This must be replaced with our non-magnetic plate in order not to comprise beyond excellent hum cancelling of our P-90 Hx. This kit included everything you need and is easily swapped. Should your Gibson not have a mounting plate then do not include this kit, so if you are not certain please take a peek under a pickup.

Remove one mounting screw (not both) and look at the thread form. If it is a fine thread form like shown for the two long screws top left of the picture of the mounting plate kit then it's a sure thing you have the steel mounting plate. However, if the thread form is coarse, more like the two shorter screws on the right side of the picture then we would think you do not have a metal mounting plate. To be absolutely certain you should loosen the strings, remove both mounting screws and take the pickup out of it's cavity and check the floor of the cavity (no need to disconnect any wiring to do this).

New build guitars will also benefit with this plate since it provides an easy and accurate way to position mounting screws for Soapbar pickups, and provide smooth and easy height adjustment.

Get the most out of your new pickups by providing them with optimum electrical environment so they achieve their full sonic potential with our Goodbye-Soldering Harness (DIY Plug-n-Play install kit) where pickups & higher quality controls & wiring are installed fast and easy without any soldering.

Details Strat Harness
Details Tele Harness
Details KHP-90 Harness

Please go to the TAB below and choose your Harness model.


Not all Gibson's have this connector, you need to check inside your guitar. see the image below



Molex 2 wire plug

Molex 5 wire plug

Your Order Specification
Product Group: P-90 USD
Model: 580 Alnico Extra 199.00
Guitar Brand: 0.00
Guitar Model: 0.00
Country of origin: 0.00
Saddle Spread: 0.00
I play: 0.00
Pole Magnets: 0.00
Type of Cover: 0.00
Pickup Name: 0.00
Pickup Position: 0.00
PoleSpread: 0.00
Notes:
TOTAL 0 USD


Note: Check the order details in the panel above and make any corrections because once added to the Cart there is no facility to edits and change order details.